|
Product Details:
|
| Weight: | 0.003 Ounce, 0.093 Grams | Feature: | High Forward Surge Current Capability |
|---|---|---|---|
| Type: | General Purpose Silicon Rectifier | IFSM: | 100.0Amps |
| VF: | 1.3Volts | I(AV): | 3.0Amps |
| High Light: | high voltage switching diode,dual series switching diode |
||
RS3A THRU RS3M SURFACE MOUNT everse Voltage - 50 to 1000 Volts Forward Current - 3.0 Amperes
| The plastic package carries Underwriters Laboratory |
| Flammability Classification 94V-0 |
| For surface mounted applications Low reverse leakage |
| Built-in strain relief,ideal for automated placement |
| High forward surge current capability |
| High temperature soldering guaranteed: |
| 250 C/10 seconds at terminals Glass passivated chip junction |
MECHANICAL DATA
Case: JEDEC DO-214AA molded plastic body over passivated chip
Terminals: Solder plated, solderable per MIL-STD-750, Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight:0.003 ounce, 0.093 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
| MDD Catalog Number | SYMBOLS | RS3A | RS3B | RS3D | RS3G | RS3J | RS3K | RS3M | UNITS |
| Maximum repetitive peak reverse voltage | VRRM | 50 | 100 | 200 | 400 | 600 | 800 | 1000 | VOLTS |
| Maximum RMS voltage | VRMS | 35 | 70 | 140 | 280 | 420 | 560 | 700 | VOLTS |
| Maximum DC blocking voltage | VDC | 50 | 100 | 200 | 400 | 600 | 800 | 1000 | VOLTS |
|
Maximum average forward rectified current at TL=75 C |
I(AV) | 3.0 | Amps | ||||||
|
Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) |
IFSM |
100.0 |
Amps |
||||||
| Maximum instantaneous forward voltage at 3.0A | VF | 1.3 | Volts | ||||||
|
Maximum DC reverse current TA=25 C at rated DC blocking voltage TA=100 C |
IR |
5.0 100.0 |
mA | ||||||
| Maximum reverse recovery time (NOTE 1) | trr | 150 | 250 | 500 | ns | ||||
| Typical junction capacitance (NOTE 2) | CJ | 60.0 | pF | ||||||
| Typical thermal resistance (NOTE 3) | RqJA | 50.0 | C/W | ||||||
| Operating junction and storage temperature range | TJ,TSTG | -50 to +150 | C | ||||||
Note:
1. Reverse recovery condition IF=0.5A,IR=1.0A,Irr=0.25A
2. Measured at 1MHz and applied reverse voltage of 4.0V D.C.
3. Thermal resistance from junction to ambient at 0.375”(9.5mm)lead length,P.C.B. mounted
RATINGS AND CHARACTERISTIC CURVES RS3A THRU RS3M
Contact Person: David
