|
Product Details:
|
| Type: | General Purpose Silicon Rectifier | Weight: | 0.002 Ounce, 0.07 Grams |
|---|---|---|---|
| Feature: | High Forward Surge Current Capability | IFSM: | 30.0Amps |
| I(AV): | 1.0Amp | VF: | 1.3Volts |
| High Light: | dual series switching diode,dual zener diode |
||
FS1A THRU FS1M SURFACE MOUNT FAST RECOVERY RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current -1.0 Ampere
MECHANICAL DATA
Case : JEDEC DO-214AC molded plastic body over passivated chip
Terminals : Solder plated, solderable per MIL-STD-750, Method 2026
Polarity : Color band denotes cathode end
Mounting Position : Any
Weight :0.002 ounce, 0.07 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
|
Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. |
|||||||||
| MDD Catalog Number | SYMBOLS | FS1A | FS1B | FS1D | FS1G | FS1J | FS1K | FS1M | UNITS |
| Maximum repetitive peak reverse voltage | VRRM | 50 | 100 | 200 | 400 | 600 | 800 | 1000 | VOLTS |
| Maximum RMS voltage | VRMS | 35 | 70 | 140 | 280 | 420 | 560 | 700 | VOLTS |
| Maximum DC blocking voltage | VDC | 50 | 100 | 200 | 400 | 600 | 800 | 1000 | VOLTS |
|
Maximum average forward rectified current at TL=90 C |
I(AV) | 1.0 | Amp | ||||||
|
Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) |
IFSM |
30.0 |
Amps |
||||||
| Maximum instantaneous forward voltage at 1.0A | VF | 1.3 | Volts | ||||||
|
Maximum DC reverse current TA=25 C at rated DC blocking voltage TA=100 C |
IR |
5.0 50.0 |
mA | ||||||
| Maximum reverse recovery time (NOTE 1) | trr | 150 | 250 | 500 | ns | ||||
| Typical junction capacitance (NOTE 2) | CJ | 15.0 | pF | ||||||
| Typical thermal resistance (NOTE 3) | RqJA | 50.0 | C/W | ||||||
| Operating junction and storage temperature range | TJ,TSTG | -65 to +150 | C | ||||||
Note:
1. Reverse recovery condition IF=0.5A,IR=1.0A,Irr=0.25A
2. Measured at 1MHz and applied reverse voltage of 4.0V D.C.
3. Thermal resistance from junction to ambient at 0.375”(9.5mm)lead length,P.C.B. mounted
RATINGS AND CHARACTERISTIC CURVES FS1A THRU FS1M
Contact Person: David
