Product Details:
|
Product ID: | RS2A THRU RS2M | Weight: | 0.002 Ounce, 0.07 Grams |
---|---|---|---|
VF: | 1.3Volts | Feature: | Glass Passivated Chip Junction |
IFSM: | 50.0 Amps | I(AV): | 2.0Amp |
High Light: | high voltage switching diode,dual zener diode |
RS2A THRU RS2M SURFACE MOUNT Reverse Voltage - 50 to 1000 Volts Forward Current -2.0 Ampere
The plastic package carries Underwriters Laboratory |
Flammability Classification 94V-0 |
For surface mounted applications Low reverse leakage |
Built-in strain relief,ideal for automated placement |
High forward surge current capability |
High temperature soldering guaranteed: |
250 C/10 seconds at terminals |
Glass passivated chip junction |
MECHANICAL DATA
Case : JEDEC DO-214AC molded plastic body over passivated chip |
Terminals : Solder plated, solderable per MIL-STD-750,Method 2026 |
Mounting Position : Any |
Weight :0.002 ounce, 0.07 grams |
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. |
|||||||||
MDD Catalog Number | SYMBOLS | RS2A | RS2B | RS2D | RS2G | RS2J | RS2K | RS2M | UNITS |
Maximum repetitive peak reverse voltage | VRRM | 50 | 100 | 200 | 400 | 600 | 800 | 1000 | VOLTS |
Maximum RMS voltage | VRMS | 35 | 70 | 140 | 280 | 420 | 560 | 700 | VOLTS |
Maximum DC blocking voltage | VDC | 50 | 100 | 200 | 400 | 600 | 800 | 1000 | VOLTS |
Maximum average forward rectified current at TL=90 C | I(AV) | 2.0 | Amp | ||||||
Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) |
IFSM |
50.0 |
Amps |
||||||
Maximum instantaneous forward voltage at 2.0A | VF | 1.3 | Volts | ||||||
Maximum DC reverse current TA=25 C at rated DC blocking voltage TA=100 C |
IR |
5.0 50.0 |
mA | ||||||
Maximum reverse recovery time (NOTE 1) | trr | 150 | 250 | 500 | ns | ||||
Typical junction capacitance (NOTE 2) | CJ | 50.0 | pF | ||||||
Typical thermal resistance (NOTE 3) | RqJA | 15.0 | C/W | ||||||
Operating junction and storage temperature range | TJ,TSTG | -50 to +150 | C |
Note:
1. Reverse recovery condition IF=0.5A,IR=1.0A,Irr=0.25A
2. Measured at 1MHz and applied reverse voltage of 4.0V D.C.
3. Thermal resistance from junction to ambient at 0.375”(9.5mm)lead length,P.C.B. mounted
RATINGS AND CHARACTERISTIC CURVES RS2A THRU RS2M
Contact Person: David