|
Product Details:
|
| Product ID: | RS1A THRU RS1M | Weight: | 0.002 Ounce, 0.07 Grams |
|---|---|---|---|
| VF: | 1.3Volts | Feature: | Low Reverse Leakage |
| IFSM: | 30.0Amps | I(AV): | 1.0Amp |
| High Light: | high voltage switching diode,dual series switching diode |
||
RS1A THRU RS1M SURFACE MOUNT Reverse Voltage - 50 to 1000 Volts Forward Current -1.0 Ampere
| The plastic package carries Underwriters Laboratory |
| Flammability Classification 94V-0 |
| For surface mounted applications Low reverse leakage |
| Built-in strain relief,ideal for automated placement |
| High forward surge current capability |
| High temperature soldering guaranteed: |
| 250 C/10 seconds at terminals |
| Glass passivated chip junction |
MECHANICAL DATA
|
Case : JEDEC DO-214AC molded plastic body over passivated chip Terminals : Solder plated, solderable per MIL-STD-750,Method 2026 |
|
Polarity : Color band denotes cathode end Mounting Position : Any |
| Weight :0.002 ounce, 0.07 grams |
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
|
Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. |
|||||||||
| MDD Catalog Number | SYMBOLS | RS1A | RS1B | RS1D | RS1G | RS1J | RS1K | RS1M | UNITS |
| Maximum repetitive peak reverse voltage | VRRM | 50 | 100 | 200 | 400 | 600 | 800 | 1000 | VOLTS |
| Maximum RMS voltage | VRMS | 35 | 70 | 140 | 280 | 420 | 560 | 700 | VOLTS |
| Maximum DC blocking voltage | VDC | 50 | 100 | 200 | 400 | 600 | 800 | 1000 | VOLTS |
|
Maximum average forward rectified current at TL=90 C |
I(AV) | 1.0 | Amp | ||||||
|
Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) |
IFSM |
30.0 |
Amps |
||||||
| Maximum instantaneous forward voltage at 1.0A | VF | 1.3 | Volts | ||||||
|
Maximum DC reverse current TA=25 C at rated DC blocking voltage TA=100 C |
IR |
5.0 50.0 |
mA | ||||||
| Maximum reverse recovery time (NOTE 1) | trr | 150 | 250 | 500 | ns | ||||
| Typical junction capacitance (NOTE 2) | CJ | 15.0 | pF | ||||||
| Typical thermal resistance (NOTE 3) | RqJA | 50.0 | C/W | ||||||
| Operating junction and storage temperature range | TJ,TSTG | -50 to +150 | C | ||||||
Note:
1. Reverse recovery condition IF=0.5A,IR=1.0A,Irr=0.25A
2. Measured at 1MHz and applied reverse voltage of 4.0V D.C.
3. Thermal resistance from junction to ambient at 0.375”(9.5mm)lead length,P.C.B. mounted
RATINGS AND CHARACTERISTIC CURVES RS1A THRU RS1M
Contact Person: Mr. David Lee
Tel: +86 13417075252
Fax: 86-755-83232335
